Suitable environmental areas for commercial timber in the state of Rio de Janeiro,Southeastern Brazil

Environment, Development and Sustainability - In state of Rio de Janeiro, the Southeast Region of Brazil, 97.91% of the reforested areas contain exclusively species of Pinus and Eucalyptus. Due to...     

Styrene/Lignin-Based Polymeric Composites Obtained Through a Sequential Mass-Suspension Polymerization Process

A modified sequential mass-suspension polymerization was employed to ensure adequate dispersion of lignin into the monomeric phase. Due to its complex macromolecular structure and low compatibility with styrene, eucalyptus wood-extracted lignin, via a modified Kraft method, was esterified with methacrylic anhydride to ensure organic phase homogeneity into the reaction medium. Infrared spectroscopy showed a decrease in the hydroxyl band, a characteristic of natural lignin (3200–3400 cm^?1) and an increase in the characteristic ester band (1720–1740 cm^?1) whereas nuclear magnetic resonance measurements exhibited intense peaks in the range from 1.7 to 2.05 ppm (–CH₃) and 5.4 to 6.2 ppm (=CH₂), related to methacrylic anhydride. Comparatively, the esterified lignin also displayed an increase of its glass transition temperature for 98?°C, related to natural lignin, whose T _g was determined to be equal to 91?°C. Styrene/lignin-based polymers exhibited higher average molar masses in comparison to the values observed for polystyrene synthesized with similar amounts of benzoyl peroxide, due to the ability of lignin to act as a free-radical scavenger. Composites obtained with styrene and natural or esterified lignin were successfully synthesized, presenting regular morphology and proper lignin dispersion. Based on a very simple polymerization system, it is possible to enhance the final properties of polystyrene through the incorporation of lignin, which represents an important platform for developing attractive polymeric materials from renewable resources.     

Human perceptions of landscape change: The case of a monodominant forest of <Emphasis Type="Italic">Attalea speciosa</Emphasis> Mart ex. Spreng (Northeast Brazil)

From the perception of human populations, we can assess the changes occurring in certain landscapes and the factors that cause those changes. Such studies have proven helpful in increasing the knowledge of the history of a landscape, recognizing past formations and projecting its future. Our research objective was to determine how a landscape dominated by the palm tree Attalea speciosa, a species of ecological, economic, and cultural importance, has been changing over time by synthesizing and comparing historical documents and local perceptions. This study was conducted in Araripe Environmental Protection Area, Northeast Region, Brazil. To understand local landscape change, we interviewed active harvesters in four communities in which A. speciosa use has been documented. Historical documents were evaluated as a complement to the interview data. According to local informants, areas previously used for cultivation and animal husbandry that were abandoned or decimated by droughts in the region may have fostered the expansion of a monodominant A. speciosa forest. Furthermore, other forms of landscape management resulting from human population growth may also have affected the current and past distribution of this forest.     

Correction to: Health risk assessment of hexachlorocyclohexane in soil,water and plants in the agricultural area of Potohar region,Punjab, Pakistan

Environmental Geochemistry and Health - A correction to this paper has been published: https://doi.org/10.1007/s10653-021-00910-5     

Uses and misuses of bioclimatic envelope modeling

Bioclimatic envelope models use associations between aspects of climate and species' occurrences to estimate the conditions that are suitable to maintain viable populations. Once bioclimatic envelopes are characterized, they can be applied to a variety of questions in ecology, evolution, and conservation. However, some have questioned the usefulness of these models, because they may be based on implausible assumptions or may be contradicted by empirical evidence. We review these areas of contention, and suggest that criticism has often been misplaced, resulting from confusion between what the models actually deliver and what users wish that they would express. Although improvements in data and methods will have some effect, the usefulness of these models is contingent on their appropriate use, and they will improve mainly via better awareness of their conceptual basis, strengths, and limitations.     

In Vitro Degradation and Cytotoxicity Response of Biobased Nanoparticles Prepared by Thiol-ene Polymerization in Miniemulsion

Journal of Polymers and the Environment - Biodegradability is a key feature for the application of polymeric devices in medicine. This study reports an experimental and theoretical study of the...     

Highly concentrated phenolic wastewater treatment by the photo-Fenton reaction, mechanism study by FTIR-ATR

Phenol degradation by Photo-Fenton reaction has been studied in highly concentrated wastewaters and most intermediate species have been identified by Fourier Transform IR-Spectroscopy with ATR device. During the photodegradation of highly concentrated phenol solutions, the formation of dissolved and precipitate tannin has been observed. The possibility of a Fe3+-Pyrogallol complex formation, previous to the tannin formation, has been proposed too. The complex formation involving Fe3+ ions could be related to the observed Photo-Fenton activity decrease. Tannin formation inhibits the complete mineralization of phenol because *OH radicals attack will produce further condensation steps and the polymer size increase. This fact limits the applicability of the process for highly concentrated phenolic wastes mineralization. However, the tannin precipitation allows its separation from the solution by conventional filtration, and reduction of the corresponding dissolved organic carbon. These observations have been proved from the identification of primary degradation products, catechol and hydroquinone. Catechol is considered to be the first step for the formation of tannins. Degradation process for phenol, catechol and hydroquinone have been monitored by total organic carbon (TOC) measurements along the reaction time span. From these results, a global mechanism for the Photo-Fenton degradation of phenol is proposed.     

Airborne bioaerosols and their impact on human health

Bioaerosols consist of aerosols originated biologically such as metabolites, toxins, or fragments of microorganisms that are present ubiquitously in the environment. International interests in bioaerosols have increased rapidly to broaden the pool of knowledge on their identification,quantification, distribution, and health impacts(e.g., infectious and respiratory diseases,allergies, and cancer). However, risk assessment of bioaerosols based on conventional culture methods has been hampered further by several factors such as:(1) the complexity of microorganisms or derivatives to be investigated;(2) the purpose, techniques, and locations of sampling; and(3) the lack of valid quantitative criteria(e.g., exposure standards and dose/effect relationships). Although exposure to some microbes is considered to be beneficial for health,more research is needed to properly assess their potential health hazards including inter-individual susceptibility, interactions with non-biological agents, and many proven/unproven health effects(e.g., atopy and atopic diseases).     

The use of Microtox to assess toxicity removal of industrial effluents from the industrial district of Camaçari (BA, Brazil)

The treatment efficiency, as toxicity removal, of complex effluents from the Industrial District of Cama?ari (BA, Brazil), after biological treatment with activated sludge was evaluated using Microtox. Samples of the equalised effluent (EE) were collected prior to treatment together with samples of the treated effluent (TE), which remained 24 h in the treatment plant. Rehydrated colonies of Vibrio fischeri were exposed to sequential dilutions of EE and TE to assess luminosity interference. Values for EC50 were calculated, together with the respective toxicity units. In all, twenty assays of each effluent type were carried out and the mean toxicity removal was 92.71%, while the chemical oxygen demand (COD) presented mean reduction of 83.04%. There was a variability of an order of magnitude between the Microtox results for the two types of effluents. The mean EC50 values were 2.12 for EE and 47.78% for TE. In spite of its weakness in some conditions, the Microtox system demonstrated to work adequately in assessing effluent toxicity removal in this treatment plant and therefore can be used for further toxicity removal programs.     

Nocturnal accumulation of CO2 underneath a tropical forest canopy along a topographical gradient

Flux measurements of carbon dioxide and water vapor above tropical rain forests are often difficult to interpret because the terrain is usually complex. This complexity induces heterogeneity in the surface but also affects lateral movement of carbon dioxide (CO2) not readily detected by the eddy covariance systems. This study describes such variability using measurements of CO2 along vertical profiles and along a toposequence in a tropical rain forest near Manaus, Brazil. Seasonal and diurnal variation was recorded, with atmospheric CO2 concentration maxima around dawn, generally higher CO2 build-up in the dry season and stronger daytime CO2 drawdown in the wet season. This variation was reflected all along the toposequence, but the slope and valley bottom accumulated clearly more CO2 than the plateaus, depending on atmospheric stability. Particularly during stable nights, accumulation was along lines of equal altitude, suggesting that large amounts of CO2 are stored in the valleys of the landscape. Flushing of this store only occurs during mid-morning, when stored CO2 may well be partly transported back to the plateaus. It is clear that, for proper interpretation of tower fluxes in such complex and actively respiring terrain, the horizontal variability of storage needs to be taken into account not only during the night but also during the mornings.